Skid steer loaders feature, an eye-opener!

Date:2018-07-21 03:03:09 Hits:70

Skid steer loaders are famous for their versatile functions, and shifting trees is one of them.

Tree spade machine hydraulic cylinder with the valve block driven, divided into three and four-valve type two. The main function is to dig the seedlings below 120 mm in diameter from one place to another and increase the efficiency by a factor of 10 relative to manual digging machines.

Tree spade machine on both sides of the semicircle through the cylinder open so that the tree can enter the encirclement of the circle, in place after both sides of the semicircle closed, the tree bar is located in the middle of the four (three) blade.

Tree spade machine affixed to the ground level pressure against the ground, leaving the front of the ground gravity as far as possible to focus on the tree spade machine. The benefit of doing so is to avoid that the resistance of the knife cut into the soil is so great that it can not be shoveled in place.

Shovel can not cut more than one blade at the same time, nor can a knife cut directly in the end, so as not to shift the partial displacement of tree spade and seedlings. Under the shovel in accordance with a certain direction in order to cut one-third, divided into three laps in the end. If the soil is soft or perfect adjustment as appropriate. However, the tree spade machine is not a panacea, a large number of gravel hard soil recommended careful operation, to avoid damage to tree spade machines.